Відео

Hey would it be possible for you to extend the cooling ducked down to the motor if I were to cut a hole in plastic above it

Omg after days of searching I’ve found a decent light kit, not sure why all the ones available are so so bad, either the headlights change in brightness with throttle or there are no proper break lights

Ive just acquired a Nikko Black Fox with Controller. It all powers up,but goes real slow forwards and backwards,with quiet a noise coming from the rear of it. Wondering whats up with it?

Is the insulation video done yet?

Love this channel.been watching for years.subscribed.

Where you found this rims?

Dude are we ever gonnna be able to pick this up.whats goin on

Awesome crawler video. 👍🏾🔥

These still available? Great idea btw! This was always such a "nightmare" bitd!! I must have collected 20+ sets of frame rails with busted off body mount bosses just while growing up and racing them.

New sub here. Thanks for your review. I have been using I think it is EBL batteries from China and they have mostly been okay. Have to recharge them quicker than I like. Lately the 1.2v limit bit me on some temp sensors I have in my outbuildings here on our Texas property. All of the 1.5v rechargeable ones looked okay but the octopus style usb charging cable seems unwieldy to me. So the XTAR have me curious. I think I am going to order some and give it a whirl. All the best from north Texas.

Are they 1/16?

Picked one up for my son! He loves it haha and so do I might just pick my self one too. But did end up breaking the driving gear rear differential it is plastic! Was a pain to locate new one but fms website is catch up on flaws but is a great first time RC

Hi, I'm coming back to this post because I have just ordered the motor cell and I am going to make it brushless, up to what winding level has it been tested?

I'm wondering if you think your rc have air brakes I hear air brakes from your speaker..

Has anymore progress made on this build?

I need 1.5v batteries for a microphone. Which one do you recommend?

Minimal rwd drifting experience you would know it won’t even be driveable without the gyro.

This is an excellent review. I don't think I've seen anyone else go into the detail on the manual as you did. It looks great and I think your description as blend of a model and trail truck is exactly right.

Blue wheels let it down massively 🤢

Is this still available this was my favourite toy growing up can I purchase it from you 🙏🙏🙏🙏🙏

GPM makes a set of metal gears for the Kaiser/CR12 that will work with these, part no. SKXS56T1233T

SO COOL..! 😎😎 I really liked, built from scratch, lighting up my SRB bodies way way back in the day. Never thought twice about doing a mod back then.. 😂

AWESOME!! 👍😎

Very late to the party, but wow! That is a mega deal, even with a cheap radio system, going to have to think about getting my hands on one. I bought the Blazing Blazer new when it first came out (radio and battery as well) for much more than what this ones costs now..🤯

Very cool! I did the same to my Sand Scorcher back in the day, using extra bezels from a Rough Rider. I also bought extra clear lenses, so I had the reg head lamps, four across above the bumper and four across the roof, even had the rear tail lamps lite as well. I made the rack that held them from old plastic clothes hangers, just heated it up and bent them to make them mount on the front suspension tower where the Rough Rider mounted the light bezel. Cannot recall the bulbs that I used, but fairly sure the came from Radio Shack. For the headlamps I used a very small drill bit to put two small holes thru the back, just used a small bit of clear silicone to hold them in, in case they needed to be replaced, plus it would also fill the holes so that water wouldn't get it. I should mention to silicone mount the clear lenses as well, much easier to replace and or repair, it doesn't take much. Really always wanted a lamp moulding just like the Lancia had, that would fit on the bug nose, that would be a cool piece.

Cast iron 2 piece wheels are a nice touch

You can never, ever ignore the cool factor.

The paleblue batteries, like all other rechargeable Li-ion batteries are very different from a regular AA battery. they have a built in buck converter to get the 5v lithium down to 1.5V, that buck converter is always on and drawing a little bit of power hence the bad shelf life. but the reason you read 0V is not because they are dead like would be the case for any other AA battery, its because the buck converter has switched off to protect the actual lithium cell. they can be recharged and will be good to go

That a cardboard box or plastic housing?

Do you have a link to the bumpers on shapewayys? I couldn't find them

I just got this car for "free" and I already spent $20 on replacing all the bearings lol

So you didnt know much about this before you reviewed I guess. Third channel is a switch in case you dont want them on all the time, I cut it off when I dont need it and it comes on when the receiver is powered. Its the most scale one I could find and it STILL doesnt give parking lights that fickin blink. Or brake lights. Like 50% until you brake or turn...

cant find any where the brake light blinks as well. frustrating. Appreciate this though, was looking for the most scale.

How bout just buy a upgrade kit and give us another video of you doing a complete engine esc swap and make it even cooler because like you said it looks awesome and i think it deserves a full upgrade....

All my batteries are like your orange and green ones. None hold a charge and after maybe 3 times they don’t charge anymore. I just bought pale blue and thought they would fix my problem since they were lithium. I’m going back to disposable batteries. Cheaper. Better.

Having a seasoned driver will help show how good these are out of the box.

Nice video and nice work! My beloved ff01's gearbox is also decomposing. Do you offer these parts ready to go printed and finished ? No printer and no access to one. Thx

make one for the grasshopper

Do you sell these? 😊

@AMPROEngineering LDRC have some new models on this series. #1899 I believe Die cast sweet looking bodies. Will you be covering them??? Please?? 🥺🥺🥺 🤩

I trimmed the bottom of the rear bulkhead battery cup and lipos fit great

If I could get one as a Receiver Ready with open diffs and a pickup body I might just buy one.

Hi! I just upgraded my tamiya blackfoot. One problem I can't find the MIP leg bones. Any help would be greatly appreciated.

I like them, i highly doubt its actually 1/24th scale but it still looks cool

Aliexpress has this car and the Trueno 2 for one. 45 plus tax for both! I ordered them plus the AE86 decals for the tofu shop!

muchas gracias, me funciono tu tip para aflojar ese pivote y engrasar la caja de velocidad

Get Hot Racing sway bars, they help a lot at turning with decent speed. Makes you roll less.

Not left handed drive..😔

Suspensions doesn't look really nice when you were actually using it, it looks like it has none

Any chance you’ll be doing a CXD 22/32 in the future? I’d love to see what you could do with them. Keep up the good work.